Universal Super Slim, Adjustable Tilt PLASMA and LCD
Super Slim/ Flush Adjustable Tilt Plasma, LCD,
LED TV Wall mount
UniversalMounts universal Tilt ST-58 wall mounts
will work with most Plasma TV screen and LCD screens from 37"
to 58". The super Flush Tilt design is easy to install and remove.
All necessary hardware is included for different wall types.
Horizontal and vertical position adjustments allow perfect positioning of the
screen regardless of the distance of wall studs.
other Tilt Mounts are 2.5" to 3" from the wall)Your screen will
be only 1.65" from the wall
Easy Tilt provides 0° to +12° angle of viewing
- Fits most 37",
40", 42", 46", 50", 55", 58" PLASMA ,
LCD & LED screens
up to 150 lbs
heavy-gauge steel construction
open Back Plate for all wire installations
to install with 31" back plate to support up
to 2 studs (most mounts are only 28")
- TV can
slide left to right on the 31" back plate, allowing you to
center the TV on the wall from 3" to 12"
up to 28.5" (730mm H) x 19.5" (500mm V) TV back Hole
Compatibility: This universal wall-mount bracket
is designed to fit flat-panel plasma and LCD screens from 37" to 58".
The TV can have a maximum weight of 150 pounds.
Construction: The bracket is constructed of
heavy-gauge steel. Uses 2mm steel. Very heavy duty mount.
Mounting: The wall plate must be anchored
directly to wall studs using the supplied lag bolts. The slots in the wall
plate can accommodate a variety of stud spacing, allowing you to easily mount
the TV to wall studs that are 16" or 24" on center. Once the wall
plate is anchored to the wall studs and the TV rails (with the TV attached) are
hooked onto the wall plate, the TV can slide left to right, allowing you to
center the TV on the wall. After the TV is secured, it will be held
approximately 1.65" from the wall.
TV Hole patterns Supported:
Horizontal 4" to 28.5" 100---730
Vertical 4" to
19.5" 100---500 mm